TYPES	Damping torque Ncm	Damping direction
FRT-C2-201-G1	2 +/- 0.6	bidirectional
FRT-C2-301-G1	3 +/- 0.8	bidirectional

Rotary Dampers
FRT-C2-301-G1

Flexible and cost efficient use

Continuous Rotation, Gear included
Damping torque 3 +/- 0.8 Ncm

The damping direction of the simple FRT-C2 and FRN-C2 is either right, left or two-sided rotation. These ACE rotary dampers with plastic body can decelerate directly in the pivot point or linear through a gear and gear rack. ACE rotary dampers are maintenance-free and ready-to-install.

Please note that the last goods issue for Christmas/New Year will be on December 23th. In the new year, outgoing goods will start again on January 2nd

This product is not available for
online order.

If you are interested in ordering this
product, click the inquiry form below
and we will contact you.

CAD Drawings

FRT-C2-301-G1

Continuous Rotation, Gear included

Technical data

Execution gear included

Damping torque 3 +/- 0.8 Ncm

Damping direction bidirectional

Gear with

Construction size Ø 15 mm

Rotational speed max. 50 rpm

Lifetime 50,000 cycles (1 cycle = 360° left-hand, 360° right-hand). Even after this time, the dampers still produce over approx. 80 % of their original damping moment. The service life may be significantly higher or lower, depending on the application.

Operating temperature range 0 °C to 50 °C

Pressure angle 20°

Material Outer body, Shaft, Gear: plastic

Mounting in any position

Tooth Involute gearing

P.C.D. 8.8 mm

No. of teeth 11

Module 0.8

Mounting information

No axial or radial forces may be induced via the shaft.

Safety information

Do not use rotary dampers as supports. Provide an external guide or support.

On request

Special designs available on request. Toothed plastic racks (modules 0.5 to 1.0) are available for the rotary dampers with pinions.